Call Us Free: +234-803-378-2777

Gypsum Powder (Plaster of Paris) Production in Nigeria; The Feasibility Report.

Gypsum Powder (Plaster of Paris) Production in Nigeria; The Feasibility Report.

150,000.00

Plaster of Paris is extensively used in ceramic industry for preparation models and moulds. It is also used as main raw material in the manufacture of toys & statues, chalk crayons, gypsum plaster boards, and decorative picture frames besides wide range of applications in the interior decoration of buildings and other establishments.

Category:

Description

Gypsum is a hydrated sulphate of calcium, found usually in clays and limestone, sometimes associated with sulphur. It is the principal commercial form of hydrated calcium sulphate (CaSO42H2O). It is usually formed by either the evaporation of salt in shallow inland seas or by the decomposition of pyrite (FeS) in the presence of calcium carbonate.

More than 90% of gypsum are used in the building and construction industry while the remaining are used in the agriculture and health sectors. Gypsum deposit also play important role as a pathfinder in the petroleum industry by virtue of the fact that the organic material commonly associated with its formation is considered as source of hydrocarbon generation and its deposits act as seal for petroleum reservoirs.

Gypsum is an important raw material in the production of Portland Cement, Plaster of Paris, School chalk, Wall board etc. Gypsum is also used extensively as a soil conditioner.

The gypsum grades from the various deposits in the country satisfy the specifications required by the cement industry. Most of the gypsum deposits have not been quantified. There is need for detailed mapping, extensive drilling, reserve evaluation, sample collection and laboratory analysis for all the gypsum deposits in the country. It has become imperative that the large deposits of gypsum in the country should be beneficiated and processed to meet the requirements in the production of crayon, chalk, Plaster of Paris, etc.

The existence of gypsum in Nigeria has been reported since 1921. Gypsum deposits are found in the sedimentary basins of the country. Identified deposits are found in Adamawa, Taraba, Yobe, Borno, Bauchi, Benue, Ogun, Sokoto, Edo, Kogi, Abia, etc

About one billion tons of gypsum deposits are spread over many sites in Nigeria. Plaster of Paris which is calcium sulphate with half molecule of water of crystallization (CaSo4. ½ H2 o) and hygroscopic characteristics obtained by duly calcined the raw material i.e. Gypsum (CaSo42H2o). It possesses outstanding property of setting and subsequent hardening when mixed with water.

Plaster of Paris is extensively used in ceramic industry for preparation models and moulds. It is also used as main raw material in the manufacture of toys & statues, chalk crayons, gypsum plaster boards, and decorative picture frames besides wide range of applications in the interior decoration of buildings and other establishments.

Nigeria currently imports POP from China, Turkey and Morocco with Morocco being the closest supplier of the product to the entire West African region. Despite its abundance in about 13 states in the country, Nigeria spent about N20 billion of its foreign exchange to import gypsum in three years. In 2009, 2010, and 2011 the country spent N1.3bn, N2.2bn and N3.2bn on the importation of gypsum anhydrite and N7.1bn; N2.7bn and N3.1bn on Plasters respectively.

The growth and demand for Plaster of Paris in this sector has been further strengthened by the boom in the Nigerian real estate sector, which is growing faster than the average GDP at a rate of 8.7 percent (GDP growth at 7.4 percent).

The growth in the hospitality industry and the advent of new malls, commercial complexes and multiplexes also lend support to the growth prospects of this industry.

Rising disposable incomes of the growing middle class and sixteen million (16,000,000) units of housing shortage, however, hold out a reassuring potential for the industry.

This report seeks to confirm the financial viability or otherwise of establishing a gypsum powder (plaster of paris) production plant in Nigeria.

The production capacity of the proposed business is seven (7) tons per hour of plaster of paris working double (2) shifts of eight (8) hours each working at 75% of the installed capacity in the first, second, third, fourth and fifth year of operations respectively.

Table of Contents

EXECUTIVE SUMMARY

1.0 Business Overview

1.1 Description of the Business
1.2 Vision and Mission Statement
1.3 Business Objective
1.4 Value Proposition
1.5 Critical Success Factor of the Business
1.6 Current Status of Business
1.7 Description of the Business Industry
1.8 Contribution to Local and National Economy

2. Marketing Plan

2.1 Description of product
2.2 Product Packaging and delivery
2.3 The Opportunity
2.4 Pricing Strategy
2.5 Target Market
2.6 Distribution and Delivery Strategy
2.7 Promotional Strategy
2.8 Competition

3. Production Plan

3.1 Description of the Location
3.2 Raw Materials
3.3 Production Equipment
3.4 Production Process
3.5 Production Cost
3.6 Stock Control Process
3.7 Pre-Operating activities and expenses
3.7.1 Operating Activities and Expenses
3.8 Project Implementation Schedule

4.0 Organizational and Management Plan

4.1 Ownership of the business
4.2 Profile of the promoters
4.3 Key Management Staff
4.3.2 Management Support Units
4.4 Details of salary schedule

5. Financial Plan

5.1 Financial Assumption
5.2 Start- up Capital Estimation
5.3 Source of Capital
5.4 Security of Loan
5.5 Loan Repayment Plan
5.6 Profit and Loss Account
5.7 Cash Flow Analysis
5.8 Viability Analysis

6.0 Business Risks and SWOT Analysis

6.1 Business Risks
6.2 SWOT Analysis

Get This Report

Are you interested in purchasing this report?

Please do pay N 150,000 into

United Bank for Africa (UBA)
Account Name: Foraminifera Market Research Limited
Account Number: 101 76 603 95

Eco Bank Plc
Account Name: Foraminifera Market Research Limited
Account Number: 274 20 569 37

After payment call us on 01 -29 52 413 / 08033782777 or email us at foraminiferamarketresearch@yahoo.com with the payment details.

After payment confirmation, the soft copy of the report would be sent to you within 24 hours.

Report Details

Report Type: Pre- Feasibility Report
Formats of Delivery: EXCEL / MS WORD
No. of Pages: 29 Pages (Text Part) / 6 Pages ( Excel Part)
Product Code: FORA/05564-807/2016/PLASTEROFPARISPRODUCTIONINNIGERIA/100001292
Publisher: Foraminifera Market Research
Release Date: 30/06/2016; Update Every 3- Months
Language: English
Delivery time: 24– 48hours