Call Us Free: +234-803-378-2777

Waste {Trash} Bag Production In Nigeria {From 100% Virgin Material}; The Feasibility Report

Waste {Trash} Bag Production In Nigeria {From 100% Virgin Material}; The Feasibility Report

50,000.00

Proper management of solid waste is critical to the health and well-being of urban residents. In Lagos metropolis, like most cities in the developing world, several tons of municipal solid waste is left uncollected on the streets each day, clogging drains, creating feeding ground for pests that spread disease and creating a myriad of related health and infrastructural problems.

Description

Proper management of solid waste is critical to the health and well-being of urban residents. In Lagos metropolis, like most cities in the developing world, several tons of municipal solid waste is left uncollected on the streets each day, clogging drains, creating feeding ground for pests that spread disease and creating a myriad of related health and infrastructural problems.

A substantial part of the urban residents in the city and suburban informal settlements of Lagos metropolis also have little or no access to solid waste collection services. This is due to lack of proper land use planning which resulted in the creation of informal settlements with narrow streets that make it difficult for collection trucks to reach many areas.

The result is that a large portion of the population is left without access to solid waste management making them particularly vulnerable.

Presently, the rate of waste generation in Lagos (with estimated population over 10 million in 2012) is 9, 000 tonnes/day (Lagos State Waste Management Authority, LAWMA) while in Kano State, the rate is 3, 849 tonnes/day (Bayero University Kano Consultancy Unit).

Generally, the average rate of generation is estimated as 0.5kg/capital/day. Biodegradable waste account for over 50% of waste generated with other component estimated at different composition in different States.

Waste bag is needed to properly handle these wastes. Waste bag can be produced from HDPE or LDPE material. High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. Known for its large strength to density ratio, HDPE is commonly used in the production of plastic bottles, corrosion-resistant piping, geomembranes, and plastic lumber.

Low-density polyethylene (LDPE) is a thermoplastic made from the monomer ethylene. It was the first grade of polyethylene, produced in 1933 by Imperial Chemical Industries (ICI) using a high pressure process via free radical polymerization.

This feasibility report seeks to examine the financial viability or otherwise of establishing waste bag production plant in Nigeria 100% virgin material {HDPE}.

The proposed plant comprise of one set film blowing machine of 35 kg / hr capacity and two sets of Ribbon-through continuous-rolled bag making machine producing 150 pcs / min.  The equipment would operate at 90% of the installed capacity working double shifts of 8 hours each in 300 day per annum.

The plant would produce 176,223 pcs per day of 450 mm * 550 mm waste bag of 0.015mm thickness each requiring 504 kg of raw materials. The product would be packaged in rolls of 30 sheets each and 30 pieces of such rolls would fill a carton.

Other equipment’s are auto load, air compressor, die rotary device and Double side’s winder.

Table of Contents

EXECUTIVE SUMMARY

Business Overview

1.1 Description of the Business
1.2 Vision and Mission Statement
1.3 Business Objective
1.4 Value Proposition
1.5 Critical Success Factor of the Business
1.6 Current Status of Business
1.7 Description of the Business Industry
1.8 Contribution to Local and National Economy

Marketing Plan

2.1 Description of product
2.2 Product Packaging and delivery
2.3 The Opportunity
2.4 Pricing Strategy
2.5 Target Market
2.6 Distribution and Delivery Strategy
2.7 Promotional Strategy
2.8 Competition

Production Plan

3.1 Description of the Location
3.2 Raw Materials
3.3 Production Equipment
3.4 Production Process
3.5 Production Cost
3.6 Stock Control Process
3.7 Pre-Operating activities and expenses
3.7.1 Operating Activities and Expenses
3.8 Milestones

Organizational and Management Plan

4.1 Ownership of the business
4.2 Profile of the promoters
4.3 Key Management Staff
4.3.2 Management Support Units
4.4 Details of salary schedule

Financial Plan

5.1 Financial Assumption
5.2 Start up Capital Estimation
5.3 Source of Capital
5.4 Security of Loan
5.5 Loan Repayment Plan
5.6 Profit and Loss Analysis
5.7 Cashflow Analysis
5.8 Viability Analysis

Business Risk and mitigation factor

6.1 Business Risks
6.2 SWOT Analysis

Get This Report

Are you interested in purchasing this report?

Please do pay N 50,000 into

United Bank for Africa (UBA)
Account Name: Foraminifera Market Research Limited
Account Number: 101 76 603 95

Eco Bank Plc
Account Name: Foraminifera Market Research Limited
Account Number: 274 20 569 37

After payment call us on 01 -29 52 413 / 08033782777 or email us at foraminiferamarketresearch@yahoo.com with the payment details.

After payment confirmation, the soft copy of the report would be sent to you within 24 hours.

Report Details

Report Type: Feasibility Report
Formats of Delivery: MS WORD
No. of Pages: 37 Pages
Product Code: FORA/2014/WASTEBAGPRODUCTIONVM/99874000-35637
Publisher: Foraminifera Market Research
Release Date: 20/08/2014; Updated Every 3- Months
Language: English
Delivery time: 24– 48hours

Reviews

There are no reviews yet.

Be the first to review “Waste {Trash} Bag Production In Nigeria {From 100% Virgin Material}; The Feasibility Report”

Your email address will not be published. Required fields are marked *